Xiamen Jingtuo Chemical Co., Ltd.
Xiamen Jingtuo Chemical Co., Ltd. To be the world leading supplier of PVC resin and plasticizer!
Add to Cart
Non Toxic Phthalate Free Plasticizers For PVC High Chemical Stability
Features:
1. Eco-friendly and non-toxic: It passed SGS testing, can meet the environmental requirements of the EU.
2. High flash point: It is not easy to volatilize and will not occur flash explosion at foaming equipment with high flash point.
3. Color: It is yellowish or colorless, will not affect the transparent PVC products.
4. Epoxy value: The higher epoxy value, the higher plasticizing effect. It can increase replacement percentage, to reduce the production cost of PVC products.
5. No odor: is odorless during our years of research and development,it can improve the PVC products quality .
6. It makes the PVC products brighter and softer.
7. It has low volatility, good compatibility, good stability to light and heat, can reduce the amount of stabilizer.
8. Plasticizing efficiency is higher than DOP, it can reduce the total amount of plasticizer.
Specification:
| Items | Standard | ||
| Appearance | Colorless transparent liquid | ||
| Color (APHA) | ≤30 | ≤50 | ≤100 |
| Ester | ≤99.5% | ≤99.0% | ≤98.5% |
| Water | ≤0.03% | ≤0.05% | ≤0.10% |
| Flash point | ≥210℃ | ≥210℃ | ≥205℃ |
| Acid value mgKOH/g | ≤0.02 | ≤0.03 | ≤0.04 |
| Density(20℃) g/cm3 | 0.981-0.984 | ||
| Volume resistivity Ω.m | ≥2×1010 | ≥1×1010 | ≥0.5×101 |
Storage:
Handling: Provide adequate ventilation and keep away from spark, excessive heat and ignition source. Storage: Keep container tightly closed in a dry and well-ventilated place.
The storage temperature should be lower than 45°C, the viscosity will be increased significantly when the temperature fall below 15°C, if the temperature lower than 5°C, it would become creamy solid and can recovered to normal appearance while the temperature is restored to 25-40°C.
Quality standard
The product meets GB/T 5761-2006 standard with its physical and chemical properties meeting requirement in table below:
1. The user can choose any one from vifscosity number, K value ,index of average polymerizapion degree.
2. The user can confer with the manufacture if they have other index ,requirement ,on thermal stability.